The product has been manufactured in compliance with correct practice. Its duration and efficiency will be greater if used correctly and with regular maintenance operations. The product must be used exclusively for the purpose for which it was designed. Any other use is considered inappropriate and potentially dangerous and the manufacturer will not be liable for damages stemming from inappropriate use.
Before carrying out any kind of cleaning, it is necessary to consult the data sheet of the detergent.
Normal maintenance may be carried out using water with a neutral detergent (pH 5-8).
If air pollution has caused a lot of build-up on the coating, there may be stains or marks that require the use of more aggressive household products, such as alcohol-based products, turpentine, white spirit or bleach (diluted to 5%). In this case, it is necessary to rinse the coating immediately after using the cleaning product. Abrasive detergents, varnishes and other detergents containing ketones and other detergents that may cause irreparable damage to the product must never be used.
Frequency of cleaning
Moderate SO2 levels in coastal area with low salinity
Industrial areas and coastal areas with moderate salinity and SO2 levels > 30 mg / m3
Industrial areas with humid and aggressive atmospheres, with SO2 > 30 mg/m3
Coastal and off-shore areas less than one km from the coast with high UV, high humidity and salt > 12 mg per litre of rainwater